34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray

LICEW
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray
34 Pcs Deep Scratch Remover Car Glass Polishing Kit 8 OZ Cerium Oxide and 2'' Wh - Gray

Features:
Deep Scratch Remover Glass Polishing Kit

  1. Cerium Oxide is the best polishing powder to glass scrach because the chemical and physical reaction.
  2. Easy to use,just mix powder with water and apply to the glass surface with the polishing felt to restore lightly scratched for windows, mirrors, tabletops, windshields, glass tables, shower screens, windscreens, fish tanks, even car headlights to like-new condition.

Suggested Instructions for Use of Cerium Oxide:
(1)Supplies Needed:
1.Cerium Oxide
2.Water (Some recommend distilled water)
3.Polishing Wheel
4.Electric Drill
5.Small Plastic Tubs (Pint or quart size)
6.Spray Bottle

(2)Directions:

  1. Clean the area you're going to work on thoroughly. Be sure there is no dirt or grime on the glass, as this may result in additional scratches once you start buffing.
  2. Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.
  3. Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.
  4. Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).
  5. Attach the dampened polishing wheel to your electric drill and dip it into the slurry.
  6. Place the polishing wheel on your work area, use small size felt wheel if scrach is near corner of for windows ; keep the wheel moving in an up and down and circular motion. Be sure that the slurry does not dry up, as this could cause your glass to overheat and crack. If your slurry is becoming dry, you can spritz it with a spray bottle full of water.

Specifications:
Cerium Oxide Powder Capacity: 8 Oz(230 g)
Felt Polishing Wheel Diameter: 20mm, 30mm
Felt Polishing Pad Diameter: 50mm/2"
Felt Polishing Disc Diameter: 50mm/2"
Drill Adapter Diameter: 6mm/0.24"
Sandpaper Grit: 80/320/1000/3000/7000
Pad Max RPM: 12000
Quantity: 34 Pcs/1 Set

Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

No Retail Package
Package Contents:
1 x 230g Cerium Oxide Powder
1 x 2cm Felt Polishing Wheel
1 x 3cm Felt Polishing Wheel
2 x Polishing Disc With 6 mm Drill Adapter
4 x 2" Diameter Wool Polishing Pad
25 x Sandpaper(5 Pieces/Each Grit)