CRC 2085 350G Zinc-It Metal Corrosion Protection Metallic Zinc Coating Is Universally Accepted As the Best Method of Rust Prevention 350G

CRC
CRC 2085 350G Zinc-It Metal Corrosion Protection Metallic Zinc Coating Is Universally Accepted As the Best Method of Rust Prevention 350G
CRC 2085 350G Zinc-It Metal Corrosion Protection Metallic Zinc Coating Is Universally Accepted As the Best Method of Rust Prevention 350G

Zinc It - Galvanic Rust Prevention

CRC Zinc It is a single component Zinc rich compound with a special epoxy binder and contains over 90% pure zinc. CRC Zinc It is a cold galvanising application that fuses directly to clean iron, or steel surfaces through electrochemical action.

CRC ZINC IT is a single component Zinc rich compound witha special epoxy binder and contains 93% of the highest purity Zinc in the dried film, to give Galvanic Rust Prevention.

Applications: CRC ZINC IT is idea for use on;

  • Transmission Towers
  • Transformers
  • Radio and TV Relay Towers
  • Power Generation Equipment
  • Structural Steel
  • Trailers
  • Roofs
  • Guard Rails
  • Welding Seams
  • Rivet Holes
  • Fencing
  • Storage Tanks
  • Off Shore Oil Rigs
  • Ships
  • Railroad Equipment
  • Sub-station Equipment
  • Touch-Up over galvanized coatings
  • Coastal and Shipborne Installations subject to severesalt water and salt spray corrosion.

FEATURES: - Easy to apply - aerosol only

  • Long term protection to steel because of cathodic action
  • Metallic zinc coating is universally accepted as the best method of rust prevention.
  • Flexible continuous protective film

SPECIFICATIONS: - Flash Point: 41°C

  • Specific Gravity (20°C): 2.20 +/- 0.05
  • Temperature Resistance: Up to 400°C
  • Complete Cure (20°C): 72 hours
  • Average Film Thickness: 50 Microns
  • Solubility in Water: Insoluble
  • VOC Content including propellant: 53%wt, 580 g/litre
  • Propellant: Hydrocarbon

Performance Characteristics:

  • Type of Film: Dry, Flexible
  • Film Thickness:
    • Wet - 150 microns
    • Dry - 75 microns
  • Coverage: 6m.sq/Lt at 75 microns
  • Drying Time: 20 min. to touch, 8hrs to recoat, 24 hrsto hard
  • Preparation: Thorough abrading, firm dry surface
  • Spraying: Clean up with thinners

Weight: 0.443