Resin Molds, Box Resin Mold Silicone Mold Resin in Heart Hexagon Square Flower Shape DIY Jewelry Container,Box Holder MoldPen Candle Soap Holder

Steps for casting:

• Step 1:Prepare material.Except for our box resin molds, you need preparing silicone measuring cups, mixing sticks, epoxy resin dye, resin pigment powder and other your favorite accessories.
• Step 2:Weigh the resin and stir it.After weighing the resin, you need to stir the resin with mixing sticks. And you can add epoxy resin dye to get your favorite colors.
• Step 3:Pour resin into the mold.Then you can pour the resin into the mold slowly and wait for the resin completely solidify.
• Step 4:Take out the finished work.After the resin completely solidify, you can release the resin out, and the beautiful trinket box is done.

How to de-mold:

• You just need to twist the silicone resin molds and release your creation out of your molds after the resin is completely cured. Your piece comes out of the mold easily, no sticking, no tearing while the mold maintains its shape.
• You can use a silicone molds resin release spray. If you don't have, you may use a baby wipe or a drop of soap mix with a bit of water as a release agent, work it down to the mold, then push the project from the bottom.

;
Note:

1. Actual color may be slightly different from the image due to different monitor and light effect.
2. Please allow 1-3 mm deviation due to manual measurement.
3. We just provide silicone molds. Please DIY!
4. After squeezing and deforming, just rest for a while,they will return to the original state.
5. After using, please wash them with water, then dry out and keep them in flat, store in a cool place.
6. Please avoid the heat and sharp tool.